CUSTOM HANDLE OEM
Custom Reel Handle OEM
We make double handles and power handles for baitcasting reels and handles for spinning reels to your design, in small lots. CNC machining, anodizing, diamond cut edges and logos are all done in house.
- Handles for both baitcasting and spinning reels
- Small lots of many lengths, shapes and colors
- Shaft-end shape, nuts and clearances checked on real reels
- NDA available before you send drawings

PRODUCTS
Handles we make
Made to your brand design and to the mounting method of the target reels.
Double handles for baitcasting reels
The standard handle with a knob on each end. Length, bend and cutout shape are made to your design.
Power handles for baitcasting reels
Single handles with a large knob for more cranking power. We check the strength of the long arm and the stiffness of the mounting area.
Handles for spinning reels
Made to the mounting method of the target reel, such as screw-in or co-rotating handles.
Handle-related parts
Handle nuts, retainer plates, knob shafts, collars and similar parts.
OPTIONS
Materials, finishes and logos
These are the common combinations. We suggest options to suit the use and price point.
| Item | Options |
|---|---|
| Material | Aluminum alloy (7075, 6061 and others). Ask us about other materials. |
| Surface finish | Single-color anodizing, two-tone anodizing, diamond cut edges |
| Shape | Arm length, bend, cutouts, knob position |
| Logo | Laser engraving, screen printing, pad printing |
FIT
Fit dimensions we confirm
A custom handle goes onto an original reel, so all of these dimensions must match. Dimensions can differ between right- and left-hand models and model years, so we check them on several real reels.
Shaft-end shape and size
Square, hex or threaded shape and size of the handle shaft end.
Nut thread
Diameter and pitch of the retaining nut thread, right-hand or left-hand.
Retainer
Shape of the retainer plate and position of its screw hole.
Clearances
Clearance to the knobs, star drag and frame. A longer arm or a different bend can leave too little clearance.
Spinning reel mounting
Screw-in versus co-rotating mounting, and the thread and length of the handle shaft.
PROCESS
How a small-lot order runs
New custom parts start with samples and are checked on real reels before production.
- 01
Discuss
Tell us your brand, the target reels, quantities and candidate colors.
- 02
NDA
If you wish, we sign a non-disclosure agreement before you send drawings.
- 03
Confirm dimensions
We confirm the fit dimensions from your drawings or from reels you send us.
- 04
Samples
We CNC machine samples and fit them to real reels.
- 05
Approve color and logo
We confirm anodizing color chips and logo position and fix an approved sample.
- 06
Small-lot production
Parts are machined to the approved sample and anodized color by color.
- 07
Outgoing inspection
We check fit dimensions, appearance and weight, and fit parts to real reels when needed.
- 08
Repeat orders
We keep the approved sample so color and dimensions match on repeat orders.
RFQ
What to send for a quote
Send what you have. We will ask for anything that is missing.
- Target reels (baitcasting or spinning, model, year, right or left hand)
- Drawings (3D model, 2D drawing) or design concepts; if there are no drawings, a sample reel
- Arm length (knob to knob), bend and knob type
- Material, surface finish, color and logo
- Quantities (per model and per color)
- Packaging (individual packing, installation instructions and so on)
Tick “An NDA is required first” on the inquiry form, and we will complete the NDA before we look at your drawings.
Send Drawings or Designs for a QuoteOther custom parts
FAQ
Frequently asked questions
Can you make small lots of handles only?
Yes. Custom handles are CNC machined without molds, so they suit small lots of many types and colors. Quantities are discussed by part and color. Each run needs programs, fixtures and anodizing setup, so very small quantities raise the unit price.
Can you make spinning reel handles?
Yes. We confirm the mounting method of the target reel, such as screw-in or co-rotating, and the thread of the handle shaft before making them.
What should we watch with a longer handle?
A longer arm gives more torque, so the strength of the arm and its mounting area matters more. Clearance to the knobs, star drag and frame can also run short, so we fit samples to real reels to check.
Can you make the knobs too?
Yes. Making handles, knobs and star drags as a set lets them be anodized in the same lot, which makes colors easier to match.
Does color change between lots?
Anodizing color can vary between lots, and alloys such as 7075 are harder to keep even than 6061. We keep color chips and approved samples and match repeat orders to the approved sample.