CUSTOM KNOB OEM
Custom Reel Handle Knob OEM
We make handle knobs for baitcasting and spinning reels to your design, in small lots. Turning, anodizing and logos are done in house, and we can suggest designs that are shared across several models.
- Knobs for both baitcasting and spinning reels
- Small lots suited to multi-color ranges and knobs shared across models
- Knob shafts, bearings and retention confirmed
- NDA available before you send drawings

PRODUCTS
Knobs we make
Made to your brand design and fitted to the target handles.
Round, I-shaped and T-shaped knobs
Standard shapes for double handles and spinning reel handles. Shape and weight are set to suit the grip.
Power knobs
Large knobs for more cranking power. The balance of weight and grip is confirmed with samples.
Lightweight knobs
Knobs lightened with cutouts and similar features. Smooth rotation and strength are checked.
Knob-related parts
Knob shafts, caps, collars and the screws that retain the knob.
OPTIONS
Materials, finishes and logos
These are the common combinations. We suggest options to suit the use and price point.
| Item | Options |
|---|---|
| Material | Aluminum alloy (6061, 7075 and others). Ask us about other materials. |
| Surface finish | Single-color anodizing, two-tone anodizing, diamond cut edges |
| Rotation | Bearings or bushings (as specified) |
| Logo | Laser engraving, screen printing, pad printing |
FIT
Fit dimensions we confirm
A knob is mounted on the handle and rotates, so we confirm these dimensions and details. With a common shaft and retention method, one knob can be shared across several models.
Knob shaft
Mounting hole on the handle, and knob shaft diameter and length.
Bearing or bushing
Bearing outer diameter, inner diameter, width and fit tightness.
Retention
How the knob is retained, with caps, screws or washers.
Clearances
Clearance to the handle arm and frame, and interference when turning.
Sharing across models
With a common shaft and retention method, the same knob fits handles of several models, which cuts part numbers and inventory.
PROCESS
How a small-lot order runs
New custom parts start with samples and are checked on real reels before production.
- 01
Discuss
Tell us your brand, the target reels, quantities and candidate colors.
- 02
NDA
If you wish, we sign a non-disclosure agreement before you send drawings.
- 03
Confirm dimensions
We confirm the fit dimensions from your drawings or from reels you send us.
- 04
Samples
We CNC machine samples and fit them to real reels.
- 05
Approve color and logo
We confirm anodizing color chips and logo position and fix an approved sample.
- 06
Small-lot production
Parts are machined to the approved sample and anodized color by color.
- 07
Outgoing inspection
We check fit dimensions, appearance and weight, and fit parts to real reels when needed.
- 08
Repeat orders
We keep the approved sample so color and dimensions match on repeat orders.
RFQ
What to send for a quote
Send what you have. We will ask for anything that is missing.
- Target reels (baitcasting or spinning, model, year, right or left hand)
- Drawings (3D model, 2D drawing) or design concepts; if there are no drawings, a sample reel
- Shape, weight and grip requirements
- Material, surface finish, color and logo
- Quantities (per model and per color)
- Packaging (individual packing, installation instructions and so on)
Tick “An NDA is required first” on the inquiry form, and we will complete the NDA before we look at your drawings.
Send Drawings or Designs for a QuoteOther custom parts
FAQ
Frequently asked questions
Can you make small lots of knobs only?
Yes. Custom knobs are turned parts with no molds, so they suit small lots in many colors. Quantities are discussed by part and color. Each run needs programs, fixtures and anodizing setup, so very small quantities raise the unit price.
Can you make spinning reel knobs?
Yes. We make knobs for both baitcasting and spinning reels, and confirm the knob shaft and retention of the target handle before making them.
Can one knob be used on several models?
Yes, if the knob shaft dimensions and retention method are made common. This reduces part numbers and inventory, which suits brands with many models.
Do knobs need bearings?
Bearings make rotation lighter, while bushings reduce part count and cost. Choose by use and price point, and in either case the fit tightness is checked.
How is a multi-color range produced?
Knobs of the same shape are machined together in one run and then anodized color by color. Starting with fewer colors and adding more as sales show demand also works well. We keep color chips and approved samples to match colors on repeat orders.