CUSTOM SPOOL OEM
Custom Reel Spool OEM
We make lightweight baitcasting spools and spare spools for spinning reels to your design, in small lots. CNC machining, porting, anodizing and logos are all done in house.
- Spools for both baitcasting and spinning reels
- Small lots across many models and colors (quantities by part and color)
- Runout and balance measured, fit checked on real reels
- NDA available before you send drawings

PRODUCTS
Spools we make
Made to your brand design and fitted to the target reels.
Lightweight baitcasting spools
Spools lightened by wall thickness and porting for casting light lures. The balance between weight, strength and runout is confirmed through samples and real casting.
Shallow and deep baitcasting spools
Spools with groove depth matched to line diameter and capacity. Fit with the brake system is confirmed.
Spare spools for spinning reels
Spare spools for specific uses, such as shallow spools for braided line. Fit with the drag inside the spool is confirmed.
Spool-related parts
Spool shafts, collars, brake part seats and other metal parts around the spool.
OPTIONS
Materials, finishes and logos
These are the common combinations. We suggest options to suit the use and price point.
| Item | Options |
|---|---|
| Material | Aluminum alloy (6061, 7075 and others) |
| Surface finish | Single-color anodizing, two-tone anodizing, diamond cut edges |
| Weight reduction | Porting on the sides and arbor, wall thickness adjustment |
| Logo | Laser engraving, screen printing, pad printing |
FIT
Fit dimensions we confirm
A custom spool goes into an original reel, so all of these dimensions must match. Dimensions can change with model year or gear ratio within the same series, so we check them on several real reels.
Spool shaft
Shaft diameter and length, shaft-end shape and bearing fit.
Bearing seats
Bearing outer diameter and width, and fit tightness.
Brake system
Where the magnetic brake acts, and the centrifugal brake shoes and their mounting position.
Clearances
Clearance to the frame, level wind and clutch mechanism.
Spinning reel drag
Drag washers and drag clicker inside the spool, and mounting on the main shaft.
PROCESS
How a small-lot order runs
New custom parts start with samples and are checked on real reels before production.
- 01
Discuss
Tell us your brand, the target reels, quantities and candidate colors.
- 02
NDA
If you wish, we sign a non-disclosure agreement before you send drawings.
- 03
Confirm dimensions
We confirm the fit dimensions from your drawings or from reels you send us.
- 04
Samples
We CNC machine samples and fit them to real reels.
- 05
Approve color and logo
We confirm anodizing color chips and logo position and fix an approved sample.
- 06
Small-lot production
Parts are machined to the approved sample and anodized color by color.
- 07
Outgoing inspection
We check fit dimensions, appearance and weight, and fit parts to real reels when needed.
- 08
Repeat orders
We keep the approved sample so color and dimensions match on repeat orders.
RFQ
What to send for a quote
Send what you have. We will ask for anything that is missing.
- Target reels (baitcasting or spinning, model, year, right or left hand)
- Drawings (3D model, 2D drawing) or design concepts; if there are no drawings, a sample reel
- Target weight, groove depth and line to be used
- Material, surface finish, color and logo
- Quantities (per model and per color)
- Packaging (individual packing, installation instructions and so on)
Tick “An NDA is required first” on the inquiry form, and we will complete the NDA before we look at your drawings.
Send Drawings or Designs for a QuoteOther custom parts
FAQ
Frequently asked questions
Can you make small lots of spools only?
Yes. Custom spools are CNC machined without molds, so they suit small lots across many models and colors. Quantities are discussed by part and color. Each run needs programs, fixtures and anodizing setup, so very small quantities raise the unit price.
Can you make spinning reel spools?
Yes. We make spools for both baitcasting and spinning reels. For spinning reels, we confirm the drag inside the spool and how the spool mounts on the main shaft.
How light can a lightweight spool be?
A lighter spool starts faster, but thin walls distort and run out more easily, and porting affects strength and balance. Tell us your target weight, and we settle it through samples and real casting.
Can we order without drawings?
With a design concept and the target reel, we can start from confirming the fit dimensions. The design should be your own original design and should not copy the look of original parts.
Does color change between lots?
Anodizing color can vary between lots. We keep color chips and approved samples and match repeat orders to the approved sample. Parts used as a set are processed in the same lot wherever possible.